Multi-element automatic analyzer

Short description:

The multi-element automatic analyzer is based on the original DHF series multi-e...

Product Detail

Technical Parameters

The multi-element automatic analyzer is based on the original DHF series multi-element fast analyzer, and adopts the automatic continuous liquid extraction system independently developed by our company for automatic liquid extraction, which solves the problem of slow manual liquid extraction speed and low efficiency of the pipette. It can synchronize the automatic rapid liquid extraction of multiple elements, improving the efficiency of instrument analysis.

The multi-element automatic analyzer is used in the silicate industry. The instrument can be used to detect the content of aluminum oxide, silica, iron oxide, titanium dioxide, calcium oxide, magnesium oxide, potassium oxide, sodium oxide and other elements in raw materials and finished products of ceramics, refractories, glass, cement, inorganic non-metallic minerals and other industries. It can measure feldspar, clay, kaolin, quartz, limestone, wollastonite, talc, dolomite, ceramic powder, glaze, frit, bauxite, corundum, alumina, magnesium oxide and other silicates, aluminate, high calcium, high magnesium samples or ores.

Functional features

1. The instrument is based on the principle of photometric analysis, and the detection range of the instrument has been further expanded.

2. With six fast measurement channels, one-click automatic liquid intake and discharge.

3. The analysis software automatically adjusts to zero and automatically corrects the deviation linearly.

4. Continuous measurement of 10 samples is possible.

5. With automatic liquid extraction system (5 channels).

Instrument composition

1. Multi-element automatic analyzer host 1

2. 1 set of computers (including printers)

3. 1 set of flame photometer

4. 4 sets of silver crucibles

5. 1 ultrasonic cleaning machine

6. Standard reserve solution 1 set

7. 1 batch of supporting supplies

installation environment

1. Power supply voltage: 220V/50Hz

2. Machine power: 1KW

3. Installation area: about 20 square meters, 800mm wide countertop is about 10 meters

4. Weight of the whole machine: 100KG

5. Ambient temperature: 10-30 ° C, recommended around 20-25 ° C

6. Relative humidity: less than 85%

Technical parameters

1. Measurement elements: iron, titanium, aluminum, silicon, calcium, magnesium, potassium, sodium, boron, zirconium, lead, zinc, manganese, chromium, nickel, cobalt, phosphorus, lithium, tin, copper, tungsten, vanadium, etc.

2. Detection accuracy: in line with GB/T4734 and GB/T6900, low content can be expanded to 0.0001% (1PPM), high content can be measured to 99.9%.

Detection speed: 2-2.5 hours to complete the detection of iron, titanium, aluminum, silicon, calcium, magnesium, potassium, sodium in 4 samples, and other elements within 3 hours.

4. Instrument stability: Data drift is less than 3 values within 5 minutes.

5. Instrument repeatability: Measured within 5 minutes of the same solution, the data change is less than 3 values.