Configuration scheme of coal quality instruments (all file types)
Configuration scheme of coal quality instruments (all file types)
1. Coal calorific value test (coal heat) 2. Coal sulfur content test 3. Total moisture and analytical water 4. Ash content, ash content 5. Coal ash fusibility test 6. Coal G value, Y value. 7. Drum strength test 8. Coal grindability index test 8. Coal spontaneous combustion 9. Coal reductivity 10. Hydrocarbon element analysis and other indicators. We make some introductions to the industrial analysis and configuration of coal
coal quality analysis instrument configuration scheme ---- （ heat detector (heat meter), coal total sulfur detection, moisture, ash, ash)
serial number | Product name | Specifications and models | Analysis project (product use) | performance characteristics |
1 | Sealing hammer type shrinkage crusher | PCS-180X150 | Break large pieces (80mm) to 6mm | Uniform particles of crushed material |
2 | Standard shaker | GZS-1 | Sieve samples of different particle sizes | |
3 | Electric blast drying oven | 101-1 | Dry the sample and record the total moisture content of the coal | economical and practical |
4 | Sealed vibration grinding machine | ZDM-100 | Smash the sample to 200 mesh | Timing, leveling |
5 | Electronic balance | AL104 | Weigh to 0.0001 | Stable and accurate |
6 | Compressor cooling calorimeter | ZDHW-9000 | Calorific value of coal | built-in refrigeration device |
7 | High precision sulfur detector | KZDL-8000 | Sulfur content of coal | Continuous processing of samples |
8 | Fully automatic industrial analyzer | GF-8000 | Coal moisture, ash volatile matter | Test 19 samples at once |
Coal quality analysis instrument configuration plan ---- mid-range type (coal quality calorimeter, coal quality sulfur meter, moisture, ash and volatile matter)
serial number | Product name | Specifications and models | Analysis project (product use) | performance characteristics |
1 | Sealing hammer crusher | SP-180X150 | Break large pieces (80mm) to 6mm | Uniform particles of crushed material |
2 | Standard shaker | GZS-1 | Sieve samples of different particle sizes | |
3 | Electric blast drying oven | 101-1 | Dry the sample and record the total moisture content of the coal | economical and practical |
4 | Sealed vibration grinding machine | ZDM-100 | Smash the sample to 200 mesh | Timing, leveling |
5 | Electronic balance | AL104 | Weigh to 0.0001 | Stable and accurate |
6 | Microcomputer automatic calorimeter | ZDHW-6000 | Calorific value of coal | Available online, available offline |
7 | Microcomputer automatic sulfur detector | KZDL-6000 | Sulfur content of coal | Available online, available offline |
8 | Automatic moisture meter | ZDSF-6000 | Coal total moisture and analytical water | Microwave infrared detection |
9 | Energy-saving Ash Splash Experimental Furnace | MFL-8000 | Coal ash and volatile matter | 20 minutes to 900 degrees Celsius |
Coal quality analysis instrument configuration plan ---- general configuration (cartridge calorimeter, coal sulfur meter, moisture, ash and volatile matter)
serial number | Product name | Specifications and models | Analysis project (product use) | performance characteristics |
1 | Sealed jaw crusher | EP-100X60 | Break large pieces (80mm) to 6mm | The crushed material is flaky |
2 | Standard shaker | GZS-1 | Sieve samples of different particle sizes | |
3 | Electric blast drying oven | 101-1 | Dry the sample and record the total moisture content of the coal | Test total water and analyze water |
4 | Sealed prototyping machine | GJ-100 | Smash the sample to 200 mesh | economical and practical |
5 | Electronic balance | FA1004 | Weigh to 0.0001 | Stable and accurate |
6 | Automatic calorimeter | BOLR-8000 | Calorific value of coal | Comes with its own printing and operation interface |
7 | Rapid sulfur detector | POINT-8000 | Sulfur content of coal | economy |
8 | XL-1 | Coal ash and volatile matter | programmed temperature control |
Remarks: If the coking and coal washing industries need to add NJ-2 adhesion index tester, JC-6000 colloidal layer tester, XPZ-200X75 roller crusher: If analyzing hydrogen, it is recommended to choose KZCH-8000 fast automatic hydrogen tester, ash melting point It is recommended to choose HR-5 microcomputer ash melting point tester (automatic judgment)
Coal washing plant laboratory equipment configuration plan
Thermal Company Coal Laboratory Instrument Configuration Sch
Configuration scheme of coal quality instruments (all file t
Configuration scheme of laboratory analyzer in iron and stee