Technical parameters of multiple sulfur determiner

Read :

Release time : 2026-03-17

商品1.png

1. Continuous and dynamic testing: with a continuous automatic sample feeding mechanism, 24 samples can be placed at one time, and samples can be inserted or added at any time during the test.

2. Accurate and fast results: using a double-layer combustion tube, the sample is burned twice in the furnace, increasing the blowing function of the sample, so that the sample can be burned quickly and completely. At the same time, a high-efficiency air pump is used to ensure that the combustion gas products fully enter the electrolytic cell, ensuring fast and accurate.

3. Highly automated: automatic sample feeding, automatic start and end of tests, automatic data processing, data storage, and report printing, basically unattended, greatly improving work efficiency.

4. High reliability: An external balance can be added to achieve automatic weighing and can be used flexibly; a number of hardware and software protection and self-diagnostic technologies are used to ensure the stable operation of the equipment.

6. With low-temperature dormancy function, it can prolong the service life of high-temperature furnaces and silicon carbon tubes.

7. With power-off and restart function: After a short power outage, the instrument can be turned on to resume the last test, without the need to scrap all the last sample tests.

8. Report on-site design: The corresponding test report format can be designed on-site according to customer requirements, without the need to modify the software.

9, with intelligent end point function, providing a variety of network access methods, combined with data interaction center to achieve data sharing, real-time data upload to the management system.

Pre : Setting Method of Self-selection Program of Intelligent Inte

Next : Preparation before installation of a fully automatic calorim

Related News