Preparation before adjustment of Kaiyuan calorimeter

Before adjusting, check the appearance of the equipment to ensure that no parts are loose or the circuit is damaged. At the same time, place the calorimeter on a stable table, preheat it for 15-20 minutes after turning on the power supply, so that the instrument can enter a stable working state and lay a solid foundation for subsequent adjustment.

Core parameter setting adjustment

Enter the operation interface and focus on adjusting core parameters such as temperature and time. Temperature parameters need to be set according to the characteristics of the test sample. Generally, conventional samples can be set to 25-30 ° C. Time parameters are adjusted according to the reaction time of the sample, usually set to 5-10 minutes. After setting, carefully check the parameter values to avoid affecting the accuracy of the test results due to parameter deviations.

Precise adjustment in the calibration process

Calibration is the key to ensure the accuracy of the test. First take the standard sample into the calorimeter, start the calibration procedure, and after the instrument automatically detects and displays the calibration value, compare the standard value. If there is any deviation, fine-tune it through the instrument calibration adjustment button until the calibration value is consistent with the standard value, and complete the calibration adjustment.

Daily commissioning and maintenance

In daily use, if the detection data fluctuates, it is necessary to check whether the sensor is clean and clean up the attached impurities in time. At the same time, regularly debug the function of the instrument to check the running status of each component to ensure that the calorimeter is always in the best working condition and ensure the efficient development of the detection work.